Home »
MCQs
IPv6 MCQs
IPv6 MCQs: This section contains multiple-choice questions and answers on the IPv6. It will help the students and professionals to test their skills and prepare well for their exams.
Here, you will find the top 45 IPv6 MCQs with answers and explanations. These IPv6 multiple-choice questions are helpful for the students and professionals who are studying/preparing for networking engineering courses/certification programs like Cisco CCNA, CCNP, CCIE, HCIA, HCIP, HCIE, etc., and also helpful for the school/college level subjects. These questions on IPv6 can be practiced, revised, and learned for these programs.
List of IPv6 MCQs
1. Which of the following developed IPv6?
- The Internet Engineering Task Force (IETF)
- The Institute of Electrical and Electronics Engineers (IEEE)
- Massachusetts Institute of Technology (MIT)
Answer: A) The Internet Engineering Task Force (IETF)
Explanation:
The Internet Engineering Task Force (IETF) created IPv6 to solve the long-anticipated issue of IPv4 address exhaustion.
Discuss this Question
2. IPv4 is ____ long.
- 16 bits
- 32 bits
- 4 bits
- 8 bits
Answer: B) 32 bits
Explanation:
IPv4 supports about 4,294,967,296 (232) addresses and is 32 bits long.
Discuss this Question
3. In contrast to IPv4, IPv6 uses ____ times more bits to address a device on the Internet.
- 2
- 8
- 4
- 6
Answer: C) 4
Explanation:
In contrast to IPv4, IPv6 uses 4 times more bits to address a device on the Internet.
Discuss this Question
4. IPv6 header is ____ as bigger than IPv4.
- 2
- 8
- 4
- 6
Answer: A) 2
Explanation:
IPv6 header is only twice as bigger as IPv4.
Discuss this Question
5. IPv6 supports which auto-configuration mode of its host devices?
- Stateful mode
- Stateless mode
- Both
Answer: C) Both
Explanation:
IPv6 allows its host devices to automatically configure themselves in both stateful and stateless modes.
Discuss this Question
6. Does IPv6 support broadcast?
- Yes
- No
Answer: B) No
Explanation:
IPv6 does not have any broadcast support anymore.
Discuss this Question
7. An IPv6 interface (host) in a network segment is uniquely recognized in which mode of addressing?
- Unicast
- Anycast
- Multicast
Answer: A) Unicast
Explanation:
An IPv6 interface (host) in a network segment is uniquely recognized in the unicast mode of addressing.
Discuss this Question
8. Is IPv6 multicast mode is same as that of IPv4?
- Yes
- No
Answer: A) Yes
Explanation:
Yes, the IPv6 multicast mode is the same as that of IPv4.
Discuss this Question
9. An IPv6 address is made of ____ bits.
- 238 bits
- 160 bits
- 138 bits
- 128 bits
Answer: D) 128 bits
Explanation:
An IPv6 address is made of 128 bits.
Discuss this Question
10. An IPv6 address is made of 128 bits divided into eight ____-bits blocks.
- 4
- 6
- 12
- 16
Answer: D) 16
Explanation:
An IPv6 address is made of 128 bits divided into eight 16-bit blocks.
Discuss this Question
11. Every block of IPv6 is converted into 4-digit ____ numbers.
- Binary
- Octal
- Hexadecimal
- Decimal
Answer: C) Hexadecimal
Explanation:
Every block of IPv6 is converted into 4-digit hexadecimal numbers.
Discuss this Question
12. According to the rules of IPv6, If two or more blocks contain consecutive zeroes then ____.
- We can omit them all and replace with single colon sign :
- We can omit them all and replace with double colon sign ::
- We can omit them all and replace with double dash sign --
- We can omit them all and replace with double underscore sign __
Answer: B) We can omit them all and replace with double colon sign ::
Explanation:
According to the rules of IPv6, If two or more blocks contain consecutive zeroes then we can omit them all and replace them with double colon sign ::
Discuss this Question
13. IPv6 has how many different types of Unicast Address schemes?
- 2
- 4
- 5
- 3
Answer: D) 3
Explanation:
There are three distinct Unicast Address Schemes in IPv6.
Discuss this Question
14. The Global Routing Prefix's three most important bits are always set to ___.
- 000
- 001
- 111
- 110
Answer: B) 001
Explanation:
The Global Routing Prefix's three most important bits are always set to 001.
Discuss this Question
15. Auto-configured IPv6 address is known as ____.
- Global unicast address
- Unique local address
- Local link address
Answer: C) Local link address
Explanation:
Auto-configured IPv6 address is known as a Link-Local address.
Discuss this Question
16. Link-Local address always starts with ____.
- FE80
- FE81
- AE80
- EE82
Answer: A) FE80
Explanation:
Link-Local address always starts with FE80.
Discuss this Question
17. ____ are used for communication among IPv6 hosts on a link (broadcast segment) only.
- Global unicast address
- Unique local address
- Local link address
Answer: C) Local link address
Explanation:
Link-local addresses are used for communication among IPv6 hosts on a link (broadcast segment) only.
Discuss this Question
18. Are Local link addresses routable?
- Yes
- No
Answer: B) No
Explanation:
Local link addresses are not routable, so a Router never forwards these addresses outside the link.
Discuss this Question
19. ____ form of IPv6 address is globally unique, it should only be used for local communication.
- Global unicast address
- Unique local address
- Local link address
Answer: B) Unique local address
Explanation:
Although the Unique local address form of IPv6 address is globally unique, it should only be used for local communication.
Discuss this Question
20. Which of the following address type is equivalent to the public address in IPv4?
- Global unicast address
- Unique local address
- Local link address
Answer: A) Global unicast address
Explanation:
Global unicast address type is equivalent to the public address in IPv4.
Discuss this Question
21. Which of the following statement is True?
- In IPv4, the address 0.0.0.0 with netmask 0.0.0.0 represents the default route.
- In IPv4, the address 1.1.1.1 with netmask 0.0.0.0 represents the default route.
- In IPv4, the address 0.0.0.0 with netmask 1.1.1.1 represents the default route.
- In IPv4, the address 0.1.0.1 with netmask 0.0.0.0 represents the default route.
Answer: A) In IPv4, the address 0.0.0.0 with netmask 0.0.0.0 represents the default route.
Explanation:
Statement A is correct, In IPv4, the address 0.0.0.0 with netmask 0.0.0.0 represents the default route.
Discuss this Question
22. Which of the following statement is True?
- The IPv6, address 1:1:1:1:1:1:1:1 with netmask all 0s represents the default route.
- The IPv6, address 0:0:0:0:0:0:0:0 with netmask all 1s represents the default route.
- The IPv6, address 0:0:0:0:0:0:0:0 with netmask all 0s represents the default route.
Answer: C) The IPv6, address 0:0:0:0:0:0:0:0 with netmask all 0s represents the default route.
Explanation:
Statement C is correct, The IPv6, address 0:0:0:0:0:0:0:0 with netmask all 0s represents the default route.
Discuss this Question
23. Loopback addresses in IPv4 are represented by ____ to ____ series.
- 127.0.0.0 to 127.255.255.255 series.
- 127.255.0.1 to 127.255.255.255 series.
- 127.0.0.1 to 127.255.255.255 series.
Answer: C) 127.0.0.1 to 127.255.255.255 series.
Explanation:
Loopback addresses in IPv4 are represented by the 127.0.0.1 to 127.255.255.255 series.
Discuss this Question
24. IPv6 headers have ____ Fixed Header.
- One
- Two
- More than one
Answer: A) One
Explanation:
IPv6 headers have one Fixed Header.
Discuss this Question
25. IPv6 fixed header is ____ bytes long.
- 60
- 40
- 20
Answer: B) 40
Explanation:
IPv6 fixed header is 40 bytes long.
Discuss this Question
26. Which of the following field is intended to prevent packets from looping indefinitely in the network?
- Time to live
- Header
- Hop limit
Answer: C) Hop limit
Explanation:
Hop Limit (8 bits) field is intended to prevent packets from looping indefinitely in the network. This is equivalent to TTL in IPv4.
Discuss this Question
27. A ____ is a device that forwards data that is not specifically addressed to it.
- Network
- Link
- Switch
- Router
Answer: D) Router
Explanation:
A router is a device that forwards data that is not specifically addressed to it.
Discuss this Question
28. ____ is the process of forwarding routable data by selecting the optimum route or path to the destination from among numerous possible routes or paths.
- Navigation
- Routing
- Tariffing
Answer: B) Routing
Explanation:
Routing is the process of forwarding routable data by selecting the optimum route or path to the destination from among numerous possible routes or paths.
Discuss this Question
29. How many types of routing protocols are there?
- 2
- 3
- 4
- 5
Answer: A) 2
Explanation:
There exist two forms of routing protocols:
- Distance Vector Routing Protocol
- Link state routing Protocol
Discuss this Question
30. When using the ____, a router exposes its connected routes and learns new routes from its neighbours.
- Distance Vector Routing Protocol
- Link state routing Protocol
Answer: A) Distance Vector Routing Protocol
Explanation:
When using the distance vector protocol, a router exposes its connected routes and learns new routes from its neighbours.
Discuss this Question
31. Which of the following is not the distance vector Routing protocol?
- RIP
- BGP
- OSPF
Answer: C) OSPF
Explanation:
RIP and BGP both are distance vector Routing protocols, whereas OSPF is not.
Discuss this Question
32. OSPF and IS-IS are ____ routing protocols.
- Distance Vector Routing Protocol
- Link state routing Protocol
Answer: B) Link state routing Protocol
Explanation:
OSPF and IS-IS are Link state Routing protocols.
Discuss this Question
33. Routing protocols are divided into how many categories?
- 5
- 4
- 3
- 2
Answer: D) 2
Explanation:
Routing protocols can be divided into two categories:
- Interior Routing Protocol
- Exterior Routing Protocol
Discuss this Question
34. Which category of protocols are used within an autonomous system or organization to distribute routes to all routers within its boundaries?
- Interior Routing Protocol
- Exterior Routing Protocol
Answer: A) Interior Routing Protocol
Explanation:
Interior Routing protocols are used within an autonomous system or organization to distribute routes to all routers within its boundaries.
Discuss this Question
35. RIP and OSPF are two examples of ____.
- Interior Routing Protocol
- Exterior Routing Protocol
Answer: A) Interior Routing Protocol
Explanation:
RIP and OSPF are two examples of Interior Routing Protocols.
Discuss this Question
36. Which of the following is the example of exterior Routing Protocol?
- RIP
- OSPS
- BGP
Answer: C) BGP
Explanation:
BGP is an example of exterior Routing Protocol.
Discuss this Question
37. An ____ is a protocol that distributes routing information between two independent systems or organizations.
- Interior Routing Protocol
- Exterior Routing Protocol
Answer: B) Exterior Routing Protocol
Explanation:
An Exterior Routing Protocol is a protocol that distributes routing information between two independent systems or organizations.
Discuss this Question
38. What do you mean by RIPng?
- Route Info protocol New Generation
- Routing Interior Protocol Next Generation
- Routing Information Protocol Next Generation
Answer: C) Routing Information Protocol Next Generation
Explanation:
RIPng stands for Routing Information Protocol Next Generation.
Discuss this Question
39. RIPng is a ____ protocol.
- Interior Routing Protocol
- Distance vector Protocol
- Both
Answer: C) Both
Explanation:
RIPng stands for Routing Information Protocol Next Generation is an Interior Routing Protocol and is a Distance Vector Protocol.
Discuss this Question
40. What is OSPFv3?
- Open Shortest Path First version 3
- Open Single Path First version 3
- Open Solo Path First version 3
- Open Straight Path First version 3
Answer: A) Open Shortest Path First version 3
Explanation:
OSPFv3 stands for Open Shortest Path First version 3.
Discuss this Question
41. OSPFv3 is a ____.
- Interior Routing Protocol
- Exterior Routing Protocol
Answer: A) Interior Routing Protocol
Explanation:
OSPFv3 is an interior routing protocol.
Discuss this Question
42. What is the full form of BGPv4?
- Bridge Gateway Protocol
- Border Gateway Protocol
- Board Gateway Protocol.
Answer: B) Border Gateway Protocol
Explanation:
BGP stands for Border Gateway Protocol.
Discuss this Question
43. ICMPv6 stands for ____.
- Intranet Controller Model Protocol version 6
- Internet Controller Message Protocol version 6
- Internet Control Model Protocol version 6
- Internet Control Message Protocol version 6
Answer: D) Internet Control Message Protocol version 6
Explanation:
ICMPv6 stands for Internet Control Message Protocol version 6.
Discuss this Question
44. ICMPv6 is used for which of the following reasons?
- Diagnostic functions
- Error and information message
- statistical purposes
- All of the above
Answer: D) All of the above
Explanation:
ICMPv6 protocol is used for diagnostic functions, error and information messages, and statistical purposes.
Discuss this Question
45. What is DHCPv6?
- Dynamic Host Conformation Protocol version 6
- Deactivate Host Configuration Protocol version 6
- Deactivate Host Conformation Protocol version 6
- Dynamic Host Configuration Protocol version 6
Answer: D) Dynamic Host Configuration Protocol version 6
Explanation:
DHCPv6 is a Dynamic Host Configuration Protocol version 6.
Discuss this Question